BCT - HORIZONTAL COOLING TANKS - ROUND

Capacity

2000 Lt, 2500 Lt, 3000 Lt / 4000 Lt, 5000 Lt, 6000 Lt, 8000 Lt, 10000 Lt,12000 Lt, 16000 Lt, 20000 Lt, 25000 Lt

Construction

AISI 304 quality stainless steel
The first wall base is 2 mm and 0.8 mm Ep type laser welded cooling evaporator surface is coupled to the wall.
The isolated wall is 1,5 mm in tanks with a capacity of 2000-3000 Lt and 2 mm in tanks with a capacity of 4000-25000 Lt.
Cooling unit, tank body is mounted on one-piece chassis.
One 0,34 HP, 33 rpm reducer and a stainless steel agitator blade connected to it are available. There are 2 mixers from 2000 Lt to 12000 Lt, 3 mixers from 16000 Lt to 20000 Lt and 4 mixers in 25000 Lt milk cooling tanks.
The insulation thickness is 60 mm and made of HCFC-free water-based high-density polyurethane foam material.
Product outlet has a DN50 male union butterfly valve.
AISI 304 stainless steel Ø 500 mm manhole cover is available on top.
There is Ø 100 mm product inlet on the manhole cover.
A Ø 90 ventilation grille is available on top.
Manual measuring scale with calculation table with a precision ratio of 3-4% is available.
It has AISI 304 quality steps to prevent slipping.
It is designed so that zero liquid remains inside during the discharge.
Welded areas are 1st class Argon TIG welding and 1st class smooth polished.
Adjustable bolt feet are available on the bottom.

Cooling Group

Fast and frost-free cooling according to minimum milk quantity
Minimum amount of gas charge
A 404 gas cooled
Baron Milk Cooling Tanks provide the possibility of cooling each milking (32 °C - 38 °C) from 35 °C to 4 °C at ambient temperature.
The compressor has a solenoid valve, expansion valve, drier, sight glass, liquid retainer and valves.
Direct cooling system
Certificate of conformity to TSE 13732/CE/EAC standard
Test compliance report
Optional designs for 2-line, 4-line and 6-line milking systems available.

Electrical Group

Electrical panels with protection class IP 65
It has the capability of operating with 380 volt energy.
Temperature display with digital thermometer
Special designed, easy to use electronic control card to control the tank operation, milk temperature, electronic milk measurement, washing system and menus.
In the event of failure of the electronic system, the cooling process can be continued by putting it into the manual position.
There is an additional electromechanical safety system set to 1.5-2 °C to prevent milk from freezing.
In case of any faults, an error message about the fault is given.
In multi-system compressors, the compressors are gradually activated to prevent sudden drawing of current.
It is possible to see malfunctions, washing temperatures, milk temperatures and electrical failures that have occurred in the last 20 days.
Phase protection relay
Automatic mixing program with special software; after the milk reaches the desired set value, the operating time of the mixer can be adjusted in the desired intervals. (3 minutes operation and 10 minutes stop)

Automatic Washing

Thanks to the specially designed CIP ball, water penetration is provided to the entire surface.
Automatic washing capability with one button
Low detergent consumption
Easy to use detergent container
Safety system preventing water from entering the milk

Digital Level Indicator

Option