BCT - VERTICAL COOLING TANKS - BOTTOM GROUP
Capacity
50 Lt, to 2000 Lt.
Construction
AISI 304 quality stainless steel
1st wall base is 2 mm and it also has 0,8 mm Ep type laser welded cooler evaporator surface that is coupled to wall.
1 st wall body 1,5 mm
Isolated body 1 mm
Cooler unit is mounted from the bottom side of the tank body.
There are 1, 25 W 21 d/d redactor and stainless steel mixer blade on redactor.
Isolation range has 50 mm thickness, isolated with water based, non-HCFC high density polyurethane foam material.
Product output has DN40-DN50 stainless, cleanable butterfly valve.
There is also spring cover.
There is Ø 200 mm covered product entry on the cover.
There is manual measuring scale with ‰ 3-4 sensitivity rate.
There are adjustable bolted stands under the tank.
Design that allow zero liquid to remain in the rank during discharge.
Welded sections are welded with 1 st class Argon TIG welding and has 1 st class smooth polishing.
Cooling Group
Fast Cooling without crystallization within minimum milk volume
Minimum gas charging
Cooling with R404 A gas
Baron Milk Cooling Tanks provide each milking to cool from 35 °C to 4 °C at ambient temperature (32 °C - 38 °C)
Direct Expansion System
TSE 13732/CE/EAC regulation of Compliance certificate
Test of Compliance Certificate
Optionally, design Suitable for 2, 4 and 6 milking time
Electric Group
Protection grade IP 65 Electric control panel
Tanks operate at 220 volt energy.
Digital thermometer heat level indicator
Electronic control card that is specially designed and is able to control the milk temperature and operation of the tank, easy utilization
Phase protection relay
System disables automatically when the cover of the tank is opened.
Automatic mixing program with special software; Mixer operation time may be adjusted with desired intervals after the milk is brought to desired ser value. (3 minutes of operation, 10 minutes of break)
Washing System
Manual washing
Option
Emergency cooling switch, digital level indicator
Milk Draining Valve